New product
DC solar controller suitable for stand alone solar plants with 12V DC pumps
In stock
Warning: Last items in stock!
Availability date:
Display | LCD |
Outputs | 1 |
Inputs (sensors) | 3 |
RPM control | Yes |
Frost protection | Yes |
The solar controller SOLAREG II Vision plus DC is a 12V DC controller suitable for stand alone solar power systems equipped with up to two collector arrays or two storage tanks and can be used for numerous system types.
- Can operate with 12V PV module, with or without battery.
- Ther battery type must be a lead gel battery. Other types only if suitable with the technical specifications. The battery fuse must chosen according the cable cross-section.
- Automatic identification of 12V batteries.
- The controller operates with 12V DC. The pumps and valves must also operate with 12V DC.
The controller is equipped with the following features:
- Intuitive operating menu with graphic symbols and four operating buttons
- Adjustable values
- Integrated operating hours counter for storage tank charging
- Extensive functions for system monitoring that display symbols to indicate errors and faults
- Storage of all values even during a prolonged mains power supply outage
- Various protective functions, such as system protection, collector protection, recooling and flow monitoring
- Generous wiring space
Diagram:
What is in the box:
Controller
Manuals German and English
The device is made in Germany
Specifications:
Housing | |
Material | 100% recyclable ABS housing for wall mount- ing |
Dimensions L x W x D in mm, weight | 175x134x56 mm; 360g |
Protection class | IP20 according to DIN 40050, EN 60529 |
Electrical specifications | |
Operating voltage | DC 12 Volt |
PV-Modul voltage max. | DC 23 Volt |
PV-Modul current max. | 2A |
Potential free contact (Relais) | DC 12 Volt / max. 2A |
Output Voltage Power - switching output | 12V DC max. 1A |
Power consumption (stand by) | 0,3W |
Fuse protection | Fine-wire fuse 5 x 20mm, 2A/T (2 amperes, delayed-action fuse) |
Radio interference level | N nach VDE 0875 |
Max. cable cross-section 12V connections | 2.5 mm² fine-wire/single wire |
Temperature sensor | PT1000, 1 kOhm at 0°C |
Miscellaneous | |
Operating temperature | 0 ... + 50°C |
Storage temperature | -10 ... + 65°C |
Humidity | max. 60 % |
Be the first to ask a question about this product!
Collector temperature Sensor with silicone cable
Storage Tank Temperature Sensor with PVC cable
Additional overvoltage protection for PT1000 sensors
Solar controller with 5 predefined diagrams, up to 2 storage tanks
Solar controller with 19 predefined diagrams, up to 2 storage tanks
12V DC solar controller for stand alone solar power systems with 5 predefined...
Solar controller with frost protection function and minimum temperature...
Solar controller SRHE M650, 3x 230V outputs, 2 PWM/Analog outputs for PWM pumps