Solar Controller SOLAREG II Vision plus View larger

Solar Controller SOLAREG II Vision plus

New product

Solarregler SOLAREG II VISION plus, 3 outputs

More details

In stock

82,00 € VAT included

Delivery: 3-7 days

Data sheet

Inputs (sensors)6
RPM controlYes
Energy YieldYes
Collector protectionYes
Frost protectionYes
Tube collectors functionYes
Recooling (holiday mode)Yes
Free Controller1

More info

SOLAREG II VISION plus controllers are high-performance microprocessor-controlled units for controlling the functions of solar thermal systems. The SOLAREG II VISION plus perfectly controls solar power systems equipped with up to two collector arrays or two storage tanks and can be used for numerous system types.

The controller is equipped with the following features:
- Intuitive operating menu with graphic symbols and four operating buttons  
- Illuminated display  
- Adjustable control values  
- Solar circuit pump RPM control or switching control  
- Start function for systems equipped with tube collectors  
- Integrated operating hours counter for storage tank charging  
- Extensive functions for system monitoring that display symbols to indicate errors and faults
- Integrated energy yield measurement   
(optional, only in conjunction with the yield measurement set)
- Storage of all values even during a prolonged mains power supply outage  
- Various protective functions, such as system protection, collector protection, recooling and anti-freeze protection
- Individually operated independent controller that can be programmed with three time frames
- Generous wiring space  
- Real-time clock function

Multi-funktional regulator
This function is reserved for output 3 and can be allocated the following functions:
- Cooling  
- Heating   
- Difference controller  
The temperature sensor for the temperature source can be selected as required.



What is in the box:

Manuals German and English

The device is made in Germany.


Material100% recyclable ABS housing for wall mount-
Dimensions L x W x D in mm, weight175x134x56 mm; 360g
Protection classIP20 according to DIN 40050, EN 60529
Electrical specifications 
Operating voltageAC 230 Volt, 50 Hz -10...+15%
Fuse protectionFine-wire fuse 5 x 20mm, 2A/T  
(2 amperes, delayed-action fuse) 
Max. cable cross-section 
230V connections
2.5 mm² fine-wire/single wire
Radio interference levelN according to VDE 0875
Temperature sensor /  
measuring range
PT1000, 1 kOhm at 0°C 
-30°C .. +250°C
Testing voltage 4 kV 1 min according to EN 60730/DIN, VDE
0631, IEC 60664/IEC
Output Voltage
Power of each switching output
Total power of all outputs
1A / approx. 230VA for cos φ = 0.7-1.0
2A / approx. 460VA maximum
Operating temperature0 ... + 50°C
Storage temperature-10 ... + 65°C
  • Reviews (0)

  • Send us your question

    questions J. Osterm. on 13/02/2017

    Ich habe 2 Speicher (Warmwasser und Puffer). Können zwei verschiedene Werte angegeben werden? z.B. Speicher 1 max 65°C und Speicher 2 max. 85°C? Bei meiner alten Steuerung wurde zuerst Speicher 1 voll beladen und erst dann auf Speicher 2 umgeschaltet.


    Ja. Sie können für die zwei Speicher unterschiedliche Maximaltemperaturen, sowie Einschalt- und Ausschaltdifferenzen eingeben. Der zweite Speicher wird auch dann beladen, wenn die Wärme für die Beladung von Speicher 1 nicht ausreicht. Speicher 1 muss also nicht unbedingt "voll" sein.

    questions J. Osterm. on 12/02/2017

    Funktioniert die Steuerung Solarregler Sunny Scout VP auch ohne Rücklauffühler?


    Ja. Ein Rücklauffühler wird nur dann benötigt wenn Sie die Ertragsmessung aktivieren.

    Question about the product

    * Required fields

    The question has been correctly sent



    12 other products in the same category:

    Customers who bought this product also bought: