grandis 650 HK View larger

Sol Scout 650 HK


New product

Highly flexible heating and solar circuit controller for the control of complete heating systems.

More details

This product is no longer in stock

385,00 € VAT included

1.2 kg
Lieferzeit 7-10 Werktage

Data sheet

PWM output3
Inputs (sensors)6
RPM controlYes
Energy YieldYes
Collector protectionYes
Frost protectionYes
Tube collectors functionYes
Recooling (holiday mode)Yes
Free Controller6
For collectorsbis 2
For storage tanksbis 2
microSD CardYes
BusProbusX or Modbus

More info

Two integrated heating circuits (up to four when flex 400 extention modules are connected). Weather-compensated, mixed or unmixed, with automatic boiler demand.

Various pre-defined solar diagrams and integrated multi-function controllers for flexible system extension.

7 outputs 230V AC
  3 control outputs for HE pumps PWM o. 0-10V ana.
  1 potential-free output
  2 interfaces for Grundfos VFS and/or flow meter
  1 radiation sensor input

  10 temperature inputs PT1000
extendable to max. (with extension modules):
  19 outputs 230V AC
control outputs for HE pumps PWM o. 0-10V ana.
   6 interfaces for yield measurement

  26 temperature inputs PT1000


  • Comfortable and intuitive user interface with 4 menus for monitoring and controlling and 4 operating buttons
  • LED-backlit LCD graphic display
  • Micro SD-Card interface
  • Data logging (data storage)
  • System specific parameter setup (storage and loading of parameter sets)
  • Logging of settings and parameters
  • Firmware update
  • Prozeda Bus
  • Internet connection, remote visualization and remote maintenance (conexio 200 remote control unit)
  • Remote control (navo 400 remote control unit)
  • Up to 4 heating circuits - outside temperature controlled, with flexible heating curves settings. Allowance for building inertia and room temperature. Automatic boiler demand, hot water preparation
  • Suitable for use with modulating or on/off output heaters
  • Each heating circuit can be assigned to the inputs and outputs of an extension module flex 400
  • Time window with reduction, increase or OFF. Week overview and holiday switching
  • "Comfort operation" for the most important functions
  • Room control and remote operation (navo 400)
  • Up to three room sensors/room actuators per heating circuit
  • Screed heating
  • Cascade circuit
  • Mixer with 230V or analog actuation
  • Mixer or valve according to target temperature or supply line set point
  • Time programs, party and holiday modes
  • 15 pre-defined solar diagrams (can be switched off)
  • Intelligent pump speed control
  • Target temperature charging (heat source min. temperature)
  • External heat exchanger and bypass-function
  • "Parallel charging" function (for 2 or more storage tanks)
  • Solar radiation evaluation
  • "Storage tank priority" function
  • Storage tank with lower priority can be deactivated
  • Tube collector function with adjustable time slot
  • Drain-Back function, time and radiation controlled
  • Protection functions, such as system protection, collector protection, anti-freeze protection and flow monitoring
  • Storage tank cooling via heating circuit
  • Parameters remain consistant even after a power outage
  • Service and status messages with flashing symbols and acoustic warning signals
  • Energy yield measurement (flow sensor,vortex flow sensor, flow indicator)
  • Multi functional controllers with various pre-programmed controller functions

What is in the box:

Manual in German (English and French as PDF download)
The device is made in Germany


Material100% recyclable ABS-housing for wall instal-
Dimensions L x W x D in mm, weight175x162x44 mm; 360g
Protection classIP21 according to DIN 40050, EN 60529
Electrical specifications 
Operating voltageAC 230 Volt, 50 Hz -10...+15%
Fuse protectionFine-wire fuse 5 x 20mm, 2A/T
(2 amperes, delayed-action fuse)
Max. cable cross-section
230V connections
2.5 mm² fine-wire/single wire
Radio interference levelN according to VDE 0875
Temperature sensor /
measuring range
PT1000, 1 kOhm at 0°C 
-30°C .. +250°C
Testing voltage4 kV 1 min according to EN 60730/DIN, VDE
0631, IEC 60664/IEC
Output Voltage
Power - switching output
300W / approx. 230VAfor cos φ = 0,7-1,0
Operating temperature0 ... + 50°C
Storage temperature-10 ... + 65°C
  • Reviews (0)

  • Send us your question

    Be the first to ask a question about this product!

    Question about the product

    * Required fields

    The question has been correctly sent


    Customers who bought this product also bought: