No products
Prices are tax included
View larger 
Sol Scout 650 HK
1336-1
New product
Highly flexible heating and solar circuit controller for the control of complete heating systems.
In stock
Warning: Last items in stock!
Data sheet
| Display | LCD |
| Outputs | 7 |
| PWM output | 3 |
| Inputs (sensors) | 6 |
| RPM control | Yes |
| Energy Yield | Yes |
| Collector protection | Yes |
| Frost protection | Yes |
| Tube collectors function | Yes |
| Recooling (holiday mode) | Yes |
| Free Controller | 6 |
| Clock | Yes |
| Type | PT1000 |
| For collectors | bis 2 |
| For storage tanks | bis 2 |
| microSD Card | Yes |
| Bus | ProbusX or Modbus |
More info
Two integrated heating circuits (up to four when flex 400 extention modules are connected). Weather-compensated, mixed or unmixed, with automatic boiler demand.
Various pre-defined solar diagrams and integrated multi-function controllers for flexible system extension.
7 outputs 230V AC
3 control outputs for HE pumps PWM o. 0-10V ana.
1 potential-free output
2 interfaces for Grundfos VFS and/or flow meter
1 radiation sensor input
10 temperature inputs PT1000
extendable to max. (with extension modules):
19 outputs 230V AC
7 control outputs for HE pumps PWM o. 0-10V ana.
6 interfaces for yield measurement
26 temperature inputs PT1000
Characteristics
- Comfortable and intuitive user interface with 4 menus for monitoring and controlling and 4 operating buttons
- LED-backlit LCD graphic display
- Micro SD-Card interface
- Data logging (data storage)
- System specific parameter setup (storage and loading of parameter sets)
- Logging of settings and parameters
- Firmware update
- Prozeda Bus
- Internet connection, remote visualization and remote maintenance (conexio 200 remote control unit)
- Remote control (navo 400 remote control unit)
- Up to 4 heating circuits - outside temperature controlled, with flexible heating curves settings. Allowance for building inertia and room temperature. Automatic boiler demand, hot water preparation
- Suitable for use with modulating or on/off output heaters
- Each heating circuit can be assigned to the inputs and outputs of an extension module flex 400
- Time window with reduction, increase or OFF. Week overview and holiday switching
- "Comfort operation" for the most important functions
- Room control and remote operation (navo 400)
- Up to three room sensors/room actuators per heating circuit
- Screed heating
- Cascade circuit
- Mixer with 230V or analog actuation
- Mixer or valve according to target temperature or supply line set point
- Time programs, party and holiday modes
- 15 pre-defined solar diagrams (can be switched off)
- Intelligent pump speed control
- Target temperature charging (heat source min. temperature)
- External heat exchanger and bypass-function
- "Parallel charging" function (for 2 or more storage tanks)
- Solar radiation evaluation
- "Storage tank priority" function
- Storage tank with lower priority can be deactivated
- Tube collector function with adjustable time slot
- Drain-Back function, time and radiation controlled
- Protection functions, such as system protection, collector protection, anti-freeze protection and flow monitoring
- Storage tank cooling via heating circuit
- Parameters remain consistant even after a power outage
- Service and status messages with flashing symbols and acoustic warning signals
- Energy yield measurement (flow sensor,vortex flow sensor, flow indicator)
- Multi functional controllers with various pre-programmed controller functions
What is in the box:
Controller
Manual in German (English and French as PDF download)
The device is made in Germany
Specifications:
| Housing | |
| Material | 100% recyclable ABS-housing for wall instal- lation |
| Dimensions L x W x D in mm, weight | 175x162x44 mm; 360g |
| Protection class | IP21 according to DIN 40050, EN 60529 |
| Electrical specifications | |
| Operating voltage | AC 230 Volt, 50 Hz -10...+15% |
| Fuse protection | Fine-wire fuse 5 x 20mm, 2A/T (2 amperes, delayed-action fuse) |
| Max. cable cross-section 230V connections | 2.5 mm² fine-wire/single wire |
| Radio interference level | N according to VDE 0875 |
| Temperature sensor / measuring range | PT1000, 1 kOhm at 0°C -30°C .. +250°C |
| Testing voltage | 4 kV 1 min according to EN 60730/DIN, VDE 0631, IEC 60664/IEC |
| Output Voltage Power - switching output | 230V~ 300W / approx. 230VAfor cos φ = 0,7-1,0 |
| Miscellaneous | |
| Operating temperature | 0 ... + 50°C |
| Storage temperature | -10 ... + 65°C |
Be the first to ask a question about this product!
Accessories
PT1000 Collector Temperature Sensor
Collector temperature Sensor with silicone cable
11,00 € VAT includedDelivery: 3-7 days
PT1000 Storage Tank Sensor
Storage Tank Temperature Sensor with PVC cable
9,90 € VAT includedDelivery: 3-7 days
PT1000 Pipe Mounted Temperature Sensor
Pipe mounted temperature sensor with silicone cable
23,00 € VAT includedDelivery: 3-7 days
Radiation Sensor for Genius plus
Radiation sensor with silicone cable for Genius plus
26,00 € VAT includedDelivery: 3-7 days
Flow Meter 1,5m³/h 90°C 1 Pulse/Litre
Flow meter with pulse generator for solar controllers, 1 puls/litre
99,00 € VAT includedDelivery: 3-7 days
Web module conexio 200
Web module for the visualization and remote control of all controller settings, parameters and measurement values
179,00 € VAT includedDelivery: 3-7 days
Customers who bought this product also bought:
Solar Controller SDC 307 incl. 1 collector and 2 storage sensors
Solar controller SDC 307, 3 230 V AC outputs, 7 sensor inputs
-
-
Solar Controller Solareg Energy HE + 2 Sensors
Solar controller with reheating and energy measurement options. For standard...